TEMS Pocket

Product

Single Site Verification

Start 2020 with Single Site Verification

Features

Test with the latest device from Samsung

Contact a TEMS Rep

Measure 5G with various scanners

Support for Android 10 TEMS Pocket 22.0 now supports devices that use Android 10. 5G NR Signal Scan with PCTEL IBflex™ and HBflex™ Utilize the portable TEMS Pocket formfactor and the new TEMS Pocket 5G Signal Scan to gain detailed information on your 5G network site coverage indoor, where NR Cell ID and Beam Index of the 8 strongest beams per SS Burst are shown in the GUI. For each Beam SSS RP, SSS RQ and CINR are shown. Of course full metrics are stored in the trp logfile for full postprocessing at a later stage. Improved Network Attach/Detach To improve registration testing, the Network Attach/Detach functionality (in some cases called Flight Mode) in TEMS Pocket and VeriSite has been reworked. This gives more stable and reliable results recorded to logfiles available on more devices. Support for LTE NB-IoT Testing TEMS Pocket users can now connect a Qualcomm based NB-IoT device. This enables LTE NB-IoT networks to be tested from a handheld device, leveraging the auto-pinpointing functionality, NB-IoT testing can now be done extremely efficiently. Views in the Idle category are populated, and measurements are recorded to logfiles for further analysis in TEMS Investigation or TEMS Discovery. To improve test capability, AT commands are supported in IOT testing in TEMS Pocket 22.0. Further functionality and logging will be added in upcoming releases, please contact TEMS Sales for more information (below).

Samsung Galaxy S10 5G

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed

Done!

Determine results

Watch our Video

Test with the latest deice from Samsung

LET'S TALK

The ZTE Axon Pro 5G is a combined 4G/5G Android 9.0 device based on the Qualcomm SnapDragon 855 chipset and the Snapdragon X50 5G modem. It can connect to 5G networks (Bands 41 and 78), and is capable of LTE 4x4 MIMO.

Samsung Galaxy Note S10+ 5G

Xiaomi Mi Mix 3 5G

Any new devices?

Contact a TEMS Rep

The Samsung Galaxy S10+ 5G is a 5G capable smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi, 256-QAM DL and 64-QAM UL. The Galaxy S10+ 5G also supports Wi-Fi 6 which makes it possible to measure Wi-Fi data throughput up to 1.5 Gbits/s. The SM-G977U/N/B supports 5G NR N78 (3500). The SM-G977P/T supports 5G NR N260 (3900), N261 (2800).

Samsung Galaxy S10 5G

Gbit/s Downlink

What are the key takeaways?

5G scanning with PCTEL IBflex™ and HBflex™

Test Cat 20 LTE using Samsung Galaxy S10

How do I place my order?

Google Pixel 3

Additional Features?

150

The Samsung Galaxy A90 5G is a 5G capable smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 5CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi. The SM-A908B supports 5G NR N78 (3500).

Samsung Galaxy S10

TEMS Pocket VeriSite provides an automated workflow for mobile and stationary tests

TEMS Pocket supports testing of 5G NR with OnePlus 7 Pro 5G devices

The Samsung Galaxy S10 5G is a 5G capable smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi, 256-QAM DL and 64-QAM UL. The Galaxy S10+ 5G also supports Wi-Fi 6 which makes it possible to measure Wi-Fi data throughput up to 1.5 Gbits/s. Galaxy S10 5G models will be available with Qualcomm or Samsung chipset depending on region. As the flagship product from Samsung, we expect this device to be a popular customer choice in many markets.

The OnePlus 7 Pro is a Qualcomm based Android 9.0 smartphone. It is 5G enabled LTE CAT 18 (for 5G Sub6 and mmWave 1.2Gbps DL / 150Mbps UL), 5CA DL, 4x4 MIMO, VoLTE, VoWIFI, 256-QUAM DL and 64-QAM UL. The OnePlus 7 Pro 5G also supports a number of realtime control functions to improve measurement capabilities.

Support for Samsung Galaxy S10 5G

Test 5G NR using Samsung Galaxy S10 5G

Mbit/s Uplink

Now supporting 5G NR testing with UE

Mbit/s Uplink

Let's get in touch

TEMS Pocket supports testing of 5G NR with OnePlus 7 Pro 5G devices

Stories

OnePlus 7 Pro 5G

Learn More About sQLEAR

Infovista was first to offer support for huawei mate 30

Go to site

7.5

OnePlus 7 Pro 5G

Support for Samsung Galaxy S20+

Gbit/s Downlink

Infovista was first to offer support for Samsung Galaxy S20+ and the samsung galaxy s20 ultra device

infovista support devices based on the latest 5g nr chipsets from qualcomm and sumsung

Samsung Galaxy S10 5G

3.1

Gbit/s Uplink

The Samsung Galaxy A90 is an Android 9 smartphone that is ready for 5G. With an efficient Qualcomm SD855 Octa-core processor and 6GB of RAM it enables highly responsive graphics and ultra-fast speeds. The SM-A908B supports 5G NR N78 (3500).

The Samsung Galaxy Note 10+ 5G is a 5G capable smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi. The SM-N976Q/0 supports 5G NR N78 (3500) and N41(2500).

5G Device Comparison

sQLEAR

This smartphone is based on the Qualcomm Snapdragon 865 Mobile Platform, incorporating the X55 Modem. The full specification of the Snapdragon 865 Mobile Platform can be found on Qualcomm website. The European/Asian version of the Samsung Galaxy S20+ is also supported by TEMS Pocket 22.0. This version is based on the Exynos 990 Mobile Processor and the Exynos 5123 Modem. The latest specification of the these devices can be found on the Samsung website www.samsung.com/exynos. This Android 10 based smartphone can be connected to TEMS Pocket 22.0 and used for testing. The Qualcomm Snapdragon 865 Mobile Platform is capable of measuring high-speed data throughput performance (up to 7.5 Gbp/s DL and 3.1 Gbp/s UL). It supports both sub-6GHz and mmWave bands and features both 5G NSA and 5G SA capability. It also supports Dynamic Spectrum Sharing (DSS). The bands supported and the exact features available on each network should be checked with the mobile operator directly.

The Xiaomi Mi Mix 3 is a 5G ready Android 9 smartphone powered by an octa-core Qualcomm SD855 processor. It comes with 6GB of RAM and is powered by a 3800mAh battery. The Xiaomi Mi Mix support 5G NR N78 (3500).

Samsuns Galaxy S20+

Support for Samsung Galaxy S20+

About

TEMS™ Pocket 22.0

Samsung S9 version F Smartphone based on the Samsung Exynos 9810 chipset, runs Android 8 and Android 9, ready for VoLTE and VoWiFi and is capable of LTE Cat. 18 with data speeds up to 1.2 Gbit/s DL and 150 Mbit/s UL. Samsung S9 version U/W/0 Smartphone based on the Qualcomm SDM845 chipset, runs Android 8 and Android 9, ready for VoLTE and VoWiFi and is capable of LTE Cat. 18 with data speeds up to 1.2 Gbit/s DL and 150 Mbit/s UL.

Test 5G NR with devices based on Qualcomm and Samsung chipsets

The automatic pinpointing, utilizing technology available in most smartphones supported by TEMS Pocket reduces the time to collect measurements with about 50%. Instead of focusing on where to add the next pinpoint, you can now walk at your own pace making use of the built-in smart positioning functions in the phone. The auto pinpointing also leads to a more accurate positioning of each measurement, which in 5G NR becomes even more important. This is part of our automation program for smart testing and is currently included in TEMS Pocket Professional offerings.

Product

Building relationships is what we do best, we are excited to connect.

did you know?

Learn More About sQLEAR

Device support

Mbit/s Uplink

time reduction

Fill out this form and we will get back to you shortly.

Gbit/s Downlink

Ensure test

TEMS Pocket provides a lightweight solution for 5G scanning. Connect your scanner via Bluetooth or USB to your TEMS Pocket device. It saves weight compared to a PC-based solution, and makes it optimal for indoor and walk testing. The PCTEL scanner is a highly flexible test tool for the traditional wireless spectrum. With 5G NR testing capabilities on sub-6 GHz bands, it can be used to clear spectrum or test 5G NR alongside LTE, legacy 3G, and 2G wireless network technologies. TEMS Pocket 21.2 can perform 5G NR RSSI scan and NR Signal Scan using the PCTEL IBflex scanner or the PCTEL HBflex scanner. In later versions of TEMS Pocket 21.x, we will support the latest firmware of the PCTEL scanner that enables Mobile Blindscan for 5G, which will simplify the setup for the user.

Support for OnePlus 7 Pro 5G

Start test

Watch our Video

Reduce time to collect indoor measurements by about 50% with our automatic pin-pointing functionality

sQLEAR

Samsung Galaxy S20+

Additional Features

Auto-Pinpointing

The Samsung Galaxy S10 is a smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi, 256-QAM DL and 64-QAM UL. The Galaxy S10 also supports Wi-Fi 6 which makes it possible to measure Wi-Fi data throughput up to 1.5 Gbits/s.

Samsung Galaxy S9

We will get back to you shortly.

Device support

1.2

TEMS Pocket provides a lightweight solution for 5G scanning. Connect your scanner via Bluetooth or USB to your TEMS Pocket device. It saves weight compared to a PC-based solution, and makes it optimal for indoor and walk testing. The PCTEL scanner is a highly flexible test tool for the traditional wireless spectrum. With 5G NR testing capabilities on sub-6 GHz bands, it can be used to clear spectrum or test 5G NR alongside LTE, legacy 3G, and 2G wireless network technologies. TEMS Pocket 21.3 can perform 5G NR RSSI scan and NR Signal Scan using the PCTEL IBflex scanner or the PCTEL HBflex scanner.

Samsung Galaxy Note 10+ 5G

Mbit/s Uplink

TEMS Pocket 22.0 includes an indoor pinpointing feature making use of regular sensors available on most new Android devices.

WATCH oUR VIDEO

Explore the highlights

5G NR testing

150

About

The Samsung Galaxy S10 5G is a capable smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi, 256-QAM DL and 64-QAM UL. The Galaxy S10 5G also supports Wi-Fi 6 which makes it possible to measure Wi-Fi data throughput up to 1.5 Gbits/s. Galaxy S10 models will be available with Qualcomm or Samsung chipset depending on region. As the flagship product from Samsung, we expect this device to be a popular customer choice in many markets.

TEMS Pocket 21.3 supports testing of 5G NR with Samsung Galaxy S10 5G and OnePlus 7 Pro 5G devices, and will continue to support a variety of new devices in the near future. TEMS Pocket can decode the Qualcomm X50, X55 and Samsung chipsets, and therefore record the 5G NR measurements, information elements and events recorded by a number of devices including: Samsung Galaxy S10+ 5G and OnePlus 7 Pro 5G. Post-Processing of 5G NR measurements is supported in TEMS Discovery 21.2, and big-data analytics in TEMS Director 3.2.

Support for Samsung Galaxy S10 5G

TEMS Pocket 22.0

The Samsung Galaxy S10 5G is a 5G capable smartphone running the latest version of Android 9, supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi, 256-QAM DL and 64-QAM UL. The Galaxy S10 5G also supports Wi-Fi 6 which makes it possible to measure Wi-Fi data throughput up to 1.5 Gbits/s. The SM-G977U/N/B supports 5G NR N78 (3500). The SM-G977P/T supports 5G NR N260 (3900), N261 (2800).

View your reports after completion. Restart your tests if needed.

Xiaomi Mi Mix 3 5G

Samsung Galaxy S10

Auto-pinpointing

Contact a TEMS Rep

With manual or predefined workflows. Easily configure test sequences.

Single Site Verification

Watch our Video

Users of TEMS Pocket 22.0 will be able to purchase the VeriSite option, which allows TEMS Pocket to be used by non-technical staff to commission new Radio Network Sites. VeriSite allows non-technical staff to perform single site verification (or site commissioning), without needing to know how to operate the tool, or what measurements need to be performed. They only need to be told where to go, execute the predefined workflow containing all the required tests and the tool will clearly indicate when each test is completed and if the acceptance criteria is passed. After the completion all resulting data is uploaded centrally, and a new site can be tested.

The Sony Xperia XZ2 H8216 is a smartphone based on the Qualcomm SDM845 chipset, runs Android 8 and Android 9, ready for VoLTE and VoWiFi and is capable of LTE Cat. 18 with data speeds up to 1.2 Gbit/s DL and 150 Mbit/s UL. It provides the best control functionality, and the most flexible VoLTE and VoWiFi support.

Explore:

The Samsung Galaxy Note 10+ 5G is an Android 9 smartphone that is ready for 5G. With an efficient Qualcomm SD855 Octa-core processor and 6GB of RAM it enables highly responsive graphics and ultra-fast speeds. The SM-N976Q/0 supports 5G NR N78 (3500) and N41(2500).

5G Device Comparison

Samsung Galaxy A90 5G

Samsung Galaxy S10+ 5G

The Xiaomi Mi Mix 3 is a 5G ready Android 9 smartphone supporting up to LTE CAT 20 (2 Gbps DL/150 Mbps UL), 7CA DL, 4x4 MIMO, LAA, VoLTE, VoWiFi. The Xiaomi Mi Mix 3 support 5G NR N78 (3500).

Infovista was first to offer support for huawei mate 30

Contact a TEMS Rep

OnePlus 7 Pro 5G

Sony Xperia XZ2

150

5G scanning with PCTEL IBflex™ and HBflex™

Connect

Support for Samsung Galaxy S10 5G

5G NR testing with scanners

Connect

Thank You!

Ensure optimal in-building network performance with TEMS Pocket, the industry-leading ultraportable solution for indoor and pedestrian area network testing.

Stories

Sony Xperia XZ2

Navigate by simple instructions. Follow directions in order to reach the destination.

Features

Gbit/s Downlink

Samsung Galaxy S10 5G

50%

Based on Definition of Done criterion.

Contact a TEMS Rep

Gbit/s Downlink

Key takeaways

Start 2020 with Single Site Verification

How do I place my order?

A number of models of the Samsung Galaxy S20+ are based on a Qualcomm Snapdragon 865 Mobile Platform, using a Qualcomm X55 5G modem. These Samsung Galaxy S20+ smartphones can be connected to TEMS Pocket 22.0 and used for testing. The Qualcomm Snapdragon 865 Mobile Platform is capable of measuring high-speed data throughput performance (up to 7.5 Gbit/s DL and 3.1 Gbit/s UL). It also supports Dynamic Spectrum Sharing (DSS) and 5G SA. However, the bands supported and the exact features available on each network should be checked with the mobile operator directly. The European/Asian version of the Samsung Galaxy S20+ is also supported by TEMS Pocket 22.0. This version is based on the Exynos 990 Mobile Processor and the Exynos 5123 Modem. The latest specification of the these devices can be found on the Samsung website www.samsung.com/exynos. The Galaxy S20+ also supports Wi-Fi 6 which makes it possible to measure Wi-Fi data throughput up to 1.5 Gbit/s. The full (latest) specification of the Snapdragon 865 Mobile Platform can be found on Qualcomm website www.qualcomm.com.

Samsung Galaxy S20+

Infovista was first to offer support for Samsung Galaxy S20+ and the samsung galaxy s20 ultra device

did you know?

Samsung Galaxy A90 5G

3.1

Gbit/s Downlink

Learn More

infovista support devices based on the latest 5g nr chipsets from qualcomm and sumsung

7.5

Use with

When indicated by the application. Check test status for more information.

ZTE Axon Pro 5G

Centralized Test and Result Administration TEMS Pocket devices can be controlled remotely from TEMS Director Fleet. This enables teams of TEMS Pocket users to be controlled from a single site. We have also introduced support for TEMS Pocket units in Controller mode. These can also receive works orders from TEMS Director Fleet, thus simplifying large scale deployments of both outdoor and indoor testing. In situations where multiple TEMS Pocket devices need to perform the same tests, using identical maps-sets and scripts, TEMS Director Fleet can synchronize all aspects. Centralized administration of test scripts and maps saves time and ensure accuracy, and using the automatic data upload you also benefit from immediate results delivered to the central point.

Use with

Samsung Galaxy S20+

Gbit/s Uplink